Filter
Top Products
GB - 11
CONTROLS AND FEATURES
See Figure 7 for locations.
Engine/Blade Control
The engine/blade control must be held
against the handlebar to start the engine and
blade.
NOTE: Pivot the engine/blade control into
position. Do not pull back toward the operator
while starting the engine or the wheel drive
may engage.
Engine/blade control feature on mower stops
engine and blade within 3 seconds whenever
operator releases handlebar. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
Recoil Starter Handle
When pulled, handle will turn engine over.
OPERATION
WARNING: Improper operation
can lead to injury. Learn what the
controls do and how they work.
Thoroughly read and understand
entire Operator Manual.
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
CAUTION: Check function of
Engine/Blade Control regularly.
Improper function of control could
cause injury.
STOP
START and RUN