Filter
Top Products
9 - 27
9.4 DISCHARGE CHUTE
To remove discharge chute unbolt the chute positioning
assembly from the discharge chute. Tip discharge
chute forward and lift.
NOTE:
Chute must rotate freely. To adjust the gears
tighten or loosen the lower nut (Figure 21). This will
adjust the spring tension on the gears.
WARNING:
DO NOT put hands or feet near
or under rotating parts. Keep clear of
discharge opening at all times.
WARNING:
NEVER direct discharge of
material toward bystanders nor allow anyone
in front of equipment while unit is in operation.
Be familiar with area of operation.
1. Chute Crank
2. Gear Cover
3. Chute Gear
4. Pinion Chute
5. Chute Handle
6. Spacer
7. Strap
8. Friction Plate
9. Compression Spring
10.Locking Nut
11.Washer
12.Deflector
13.Discharge Chute
Figure 21
1
2
3
4
5
6
7
8
9
10
11
12
13