Filter
Top Products
5-4 Clear Memory
1. Press and hold the“Set Button” (4-6,Fig.1) for about 3 seconds.
2. The main LCD should then display1000.Now press the“Enter Button” (4-4-, Fig.1).
3. Press the “SetButton” (4-6, Fig.1) three times and you will see the CLr marker in the bottom
of the LCD. The topnumber is thenumberof stored data points.
4. Press the “Function Button” (4-5,Fig. 1)and the top number will go to zero.
5. Press the “Enter Button” (4-4-, Fig. 1) to clear memory.
6. You can press the“ESC Button” (4-3, Fig. 1) return to the normal measurement mode.
6. Auto Power Off Disable
This instrumenthas a“Auto Power Off" function thatcan prolong battery life. The meter will
shut offautomatically if none ofthe buttons are pressed in approx. 10 min.
To disable this function, selectthe memory record function during a measurement by pressing
the " REC. Button” (4-4,Fig. 1 ).
10