Filter
Top Products
OPERATION
TX235 02/07 Operation Section 4-18
© 2007 Alamo Group Inc.
OPERATION
• Inspect oil level in all gearboxes and
replenish if needed. A low oil level is a
warning sign that the gearbox may be
cracked or its seal damaged and needs to be
replaced.
• Perform scheduled lubrication as specified in
the maintenance section. OPS-R-0076_B
• Inspect cutter knives and knife pins for
looseness and excessive wear. Make sure
the mower is securely blocked up before
crawling beneath. Replace damaged, worn,
and missing knives as complete sets to
maintain cuttershaft balance.
• Remove any grass or other debris which may
be wrapped around the cuttershafts.
• Inspect the condition of deck skid shoes and
hardware. OPS-R-0050
• Ensure each hydraulic cylinder is installed
and retained correctly. Ensure the proper size
pins are used to retain the cylinders in place
and are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports. IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-R-0013_D