Filter
Top Products
© 2004 Alamo Group Inc.
2-3
HYDRO 15 (HY15)
SERVICE BULLETIN No. 981704
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Blade Date Code Inspection : (with listed date code only apply)
Subject:
Normal random inspection of blades manufactured during the time period from Jan. 7, 1998 to Mar.
11, 1998, which are utilized on the above listed machines indicates that the quality of a small percentage
of the blades, may be lower than that which is acceptable to Alamo Industrial standards.
Service Required:
As a precaution, and in the interest of promoting complete customer satisfaction, the following
repair procedure is deemed necessary:
1. Replace the mower blades on each mower or mower section as listed above. Only change the
blades (blade P/N listed below) on models listed above and blade with the dates codes listed below.
2. Inspect any blades located in your parts stock with the following date codes that are spare parts
for the above listed models and/or sections.
3. Date Codes of affected blades are 08007 to 08063, the date codes are stamped into the underside
of the blade next to the blade bolt hole, they can be seen from the underside.
Parts Involved: Mower blades involved are P/N 00750788T, 00759339, 0622010330, 582013, 8588A
HA750788T & HA582013 but only blades with the above date codes.
Models: Hydro 15 Wing Only s/n 02067 to 02110
Hydro 10 Wing Only s/n 02098 to 02111, AG72 s/n 01759 to 02030,
AG72H s/n 01013, AG15-IV wing only s/n 03946 to 03970, AG60B
s/n 01472 to 01589, AG72B s/n 02113 to 02160 & 01663 to 01670
Date:
Mar. 17, 1998
Bulletin No:
981704
(Old # 980001A)
Parts:
100 % at Dealer Net
Labor:
.0 hr. (to be determine on
case by case)
Termination Date:
May 15, 1995
Old Parts Disposition:
Retain Parts involved for
return
Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.
Figure 1
Mfg. Date Code
Underside
of Blade
Blade Bolt Hole
Blade P/N
Alamo
Logo
Torque Blade Bolt to
Specfications listed in operators
manual for the model being
repaired