Filter
Top Products
SAFETY
F-4145 01/11 Safety Section 1-14
© 2011 Alamo Group Inc.
SAFETY
Concluding Safety Instructions and Practices
Periodically inspect all moving parts for wear and replace when necessary with
authorized service parts. Look for loose fasteners, worn or broken parts, and
leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious
injury may occur from not maintaining this machine in good working order.
(SG-21)
Always maintain the safety signs in good readable condition. If the safety signs are missing,
damaged, or unreadable, obtain and install replacement safety signs immediately.
(SG-5)
Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is
spilled, move machine away from the area of the spill and avoid creating any source of ignition until
the gasoline has evaporated.
(SG-28)
Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of
its components or any Implement function.
(SG-8)
Never work under the Implement, the framework, or any lifted component
unless the Implement is securely supported or blocked up to prevent sudden
or inadvertent falling which could cause serious injury or even death.
(SG-14)
PARTS INFORMATION
Rhino products are designed utilizing specifically matched system components to ensure optimum equipment
performance. These parts are made and tested to Rhino specifications. Non-genuine "will fit" parts do not consistently
meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a
safety hazard. Use genuine Rhino parts for economy and safety.
(SPRM-2)
SEE YOUR RHINO DEALER
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control
and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved
in the operation, transport, maintenance, and storage of the machine. Refer also to Safety Messages and operation
instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay close attention to the Safety
Signs affixed to the Tractor and Equipment.
(SG-18)