Filter
Top Products
SAFETY
F-4145 01/11 Safety Section 1-13
© 2011 Alamo Group Inc.
SAFETY
Storage Safety Instructions and Practices
Maintenance Safety Instructions and Practices
Always lower legs and bucket to the ground and engage the swing lock when the Backhoe is not in
use.
(SBH-8)
Always store in a stable position with the swing lock and lift ram strap engaged. (SBH-12)
Do not remove the attachment from the Backhoe when the Backhoe is disconnected from the tractor.
The attachment stabilizes the Backhoe. If the attachment is removed, the Backhoe will fall and could
result in serious injury.
(SBH-25
Never crawl under or allow children to play around or on a Backhoe that is disconnected from the
tractor. The Backhoe could fall crushing a person resulting in serious injury or death.
(SBH-33)
Perform service, repairs and lubrication according to the maintenance section. Ensure the unit is
properly lubricated as specified in the lubrication schedule and all bolts and nuts are properly torqued.
Failure to properly service, repair and maintain this Implement in good operating condition could
cause component failure and possible serious injury or even death.
(SG-35)
Relieve hydraulic pressure prior to doing any maintenance or repair work on the
Implement. Place the Implement on the ground or securely blocked up,
disengage the PTO, and turn off the tractor engine. Push and pull the Remote
Cylinder lever in and out several times. Disconnect and remove the Implement
hydraulic hoses from the tractor prior to starting any maintenance or repair
work.
(STL-17)
Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while
tractor engine is running.
(SG-20)