Filter
Top Products
OPERATION
800 01/11 Operation Section 4-25
© 2011 Alamo Group Inc.
OPERATION
14. TROUBLESHOOTING GUIDE
Problem Possible Cause Remedy
Bent Moldboard Small curve is normal from weld Can be removed but will not affect
pull operation
Hitting hidden objects Know soil conditions, keep speed to
a minimum.
Blade will not penetrate soil Cutting edge dull Replace Cutting edge
Blade set to straight Increase Top Link length
Soil too hard Use scarifiers to loosen soil
A-Frame bent Hitting hidden objects in the Use slow speed when in unknown
backfill position soil conditions
Moldboard digging in too Blade pitch excessive Adjust Top Link
much Soft ground Install Planer Wheel
Install Skid Shoes
Unable to hold level ground Tractor and Blade following contour Install Planer Wheel
Tractor Draft Control lifting Blade Set Tractor Draft Control
Shearing Index Pins Hitting Solid Objects Know Soil Conditions
Carrier Index Pin Worn Replace Worn Parts
Carrier Index Pin Soft Replace Pin