Filter
Top Products
INTRODUCTION
800 01/11 Introduction Section 2-3
© 2011 Alamo Group Inc.
INTRODUCTION
The RHINO 800 Rear-Mounted Blade is available in widths of 7' and 8' and features a heavy-duty CAT I-II
hitch. CAT II quick-coupler bushings are available for fast and easy unit “hook-up.” Mainframe swing,
moldboard angle, and moldboard tilt adjustments are easily made by relocating the index pins manually. The
800 Blade features a maximum of 30" of offset from the center line of the tractor for working outside the tractor
tire. The 2-1/2” diameter solid steel kingpin and the 3/8” x 17" reinforced moldboard are standard for rugged
durability. Bolt-on skid shoes allow removal of material from finished surfaces, including snow removal from
roads, without cutting into the surface. Skid shoes, quick-tach end plates, and CAT II quick-coupler bushings
are optional equipment.
At least 20% or the tractor’s weight must be on the front tires with the implement lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills,
rough terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).