Filter
Top Products
OPERATION
260/272/284 01/11 Operation Section 4-10
© 2011 Alamo Group Inc.
OPERATION
4. Turn off the tractor engine and dismount.
5. One lift arm at a time, align arm end hole
between the set of A-frame lift lugs. Insert hitch
pin through the lug and arm holes and insert
retaining pin into hitch pin.
6. Walk around to opposite side and repeat
procedure for remaining lift arm and hitch pin.
7. Extend or retract 3-point top link to align its end
hole with the holes of the mower’s top link.
Insert the top link hitch pin and insert retaining
pin into hitch pin.
8. Adjust any lower link check chains, guide
blocks, or sway blocks to prevent the mower
from swaying side to side and possible contact
with tractor rear tires.
NOTE: Offset Adaptor Hitches are available to position the mower to the left or right. Mowers with Offset
Adaptor hitches connect to the 3-Point hitch the same way as the mower A-frame. See Offset Adaptor Hitch in
the Assembly Section for details to equip the mower with this feature.
5.2 3-Point Quick Hitch
Our 3-Point Quick Hitch is designed to connect to a
Quick-Attach Coupler making mounting and
dismounting your mower easier. The 3-Point Quick
Hitch is also designed to connect the cutter to a
tractor’s three-point linkage without the use of a
Quick-Attach Coupler.