Agri-Fab 45-0346 Lawn Aerator User Manual


  Open as PDF
of 20
 
8
FIGURE 14 REAR VIEW
FIGURE 15 REAR VIEW
25. Assemble the lift handle through the tray and attach it
to the hitch arm mount bracket assembled to the axle
bracket. Use a 5/16" x 1" hex bolt (D) and a 5/16" nylock
nut (G). Tighten.Seegure15.
26. Position the hitch arm mount bracket so that there is
side tension on the lift handle when it is locked in the
up position. Tightenthenuts.Seegure15.
27. Assemble the grip (Q) onto the end of the lift handle.
Seegure15.
20. Turn the aerator right side up and assemble the front
ends of the hitch arms together using two 5/16" x 1-1/4"
hex bolts (C) and 5/16" nylock nuts (G). Do not tighten
yet. Seegure13.
21. Assemble the two hitch brackets to the top and bottom
of the hitch arms using two 5/16" x 2" hex bolts (B) and
5/16" nylock nuts (G). Do not tighten yet. Seegure
13.
22. Assemble the 3/8" hitch pin (J) through the hitch brackets
andsecureitwitha1/8"haircotterpin(I).Seegure
13.
23. Tighten the bolts and nuts assembled in step 20.
Tighten the bolts and nuts assembled in step 21.
Tighten the bolts and nuts assembled in step 18.
Tighten the bolts and nuts assembled in step 3.
Tighten the bolts and nuts assembled in step 17.
24. Assemble a hitch arm mount bracket to the axle bracket
using two 5/16" x 1" carriage bolts (E) and 5/16" nylock
nuts (G). Do not tighten yet.Seegure14.
FIGURE 13 FRONT VIEW
(G) 5/16" NYLOCK NUT
(I) 1/8" HAIR
COTTER PIN
(C) 5/16" x 1-1/4"
HEX BOLT
(B) 5/16" x 2"
HEX BOLT
(J) 3/8" HITCH PIN
(G) 5/16" NYLOCK NUT
(E) 5/16" x 1"
CARRIAGE BOLT
(G) 5/16" NYLOCK NUT
(G) 5/16" NYLOCK NUT
(D) 5/16" x 1"
HEX BOLT
LIFT HANDLE
(T) GRIP
ENGLISH
 previous next