Filter
Top Products
Selecting the Files to be Generated Using the Frame Generator
Agilent 81250 ParBERT SONET/SDH Frame Generator, November 2002 11
Selecting the Files to be
Generated
You can optionally select the files to be generated. By default, all files
are generated. You can change this selection in a dialog box that opens
when you select File -> Generation Setting.
Figure 2 File generation dialog box
You can select from the following files:
• Frame Files (*.hfm)
These files are in an human-readable intermediate format that can
only be interpreted by the SONET tool.
• Analyzer Files (*_ana.seg)
These files are imported into ParBERT for the analyzer.
• Generator Files (*_gen.seg)
These files are imported into ParBERT for the generator.
• B Bytes Files (*.bbs)
These files are for information only about the generated parity bytes
(B1 to B3 bytes).
Automatic Production If you are not going to edit the frame files, you have to select Analyzer
File and Generator File.
Manual Production If you are going to edit the frame files, you only have to select Frame
File.