Agilent Technologies 54624A Sprinkler User Manual


 
ii
The Oscilloscope At a Glance
Choose from a variety of oscilloscopes for capturing
long, non-repeating signals
with 200 MSa/s sample rate and 2 MBytes of
MegaZoom deep memory per channel.
Agilent 54621A - 2-channel, 60-MHz bandwidth
Agilent 54621D - 2-channel +16 logic channels, 60-
MHz bandwidth
Agilent 54622A - 2-channel, 100-MHz bandwidth
Agilent 54622D - 2-channel +16 logic channels,
100-MHz bandwidth
Agilent 54624A - 4-channel, 100-MHz bandwidth
Display shows current input signals
All analog and digital (54621D/22D) channels
displayed in main and delayed mode
Indicators for channel, time base, digital (54621D/
22D) channel activity, trigger and acquisition
status
Softkey labels
Measurement results
Digital channel controls select, position, and label
inputs (54621D/22D)
Turn channels on or off individually or in groups
of 8
Rearrange order of channels to group related
signals
Create and display labels to identify channels
Run control keys begin and end data acquisition
Run/Stop starts and stops continuous
acquisitions
Single performs one acquisition
Infinite persistence accumulates and displays the
results of multiple acquisitions
Horizontal Controls select sweep speed and delay
parameters
Sweep speeds from 5 ns/div to 50 ns/div
Delay control moves waveform display to point of
interest
Delayed mode and delay allow zooming in to show
a portion of waveform in detail (split screen)
Trigger keys define what data the oscilloscope will
trigger on
Source key allows conventional oscilloscope
triggering
Modes include Edge, Pulse Width, Pattern, CAN,
Duration, I
2
C, LIN, Sequence, SPI, TV, and USB
triggering
General controls measure, save and restore results,
and configure the oscilloscope
Waveform math including FFT, subtract, multiply,
integrate, and differentiate
Use Quick Meas to make automatic
measurements Integrated counter included with
Quick Meas.
Use cursors to make manual measurements
Save or recall measurement configurations or
previous results
Autoscale performs simple one-button setup of
the oscilloscope
Softkeys extend the functionality of command keys
Select measurement types, operating modes, trigger
specifications, label data, and more
Digital channel inputs through a flexible probing
system (54621D/22D)
Sixteen channels through a dual 8-channel cable
with micro-clips
Set logic levels as TTL, CMOS, ECL, or to a user-
definable voltage
Utilities
Dedicated parallel printer port, controller
operation, floppy disk storage
Built in Quick Help system
Press and hold any key front-panel key or softkey
to get help in 11 languages.
service.book Page ii Wednesday, December 18, 2002 8:35 AM