Filter
Top Products
1680-Series Quick Start/Installation 7
If expected Windows Welcome questions do not appear
During first-time power-up, depending on the configuration of your network,
some of the Windows Welcome questions that should appear, like “Is this
computer in a domain?”, may not appear.
If this occurs, you need to change the logic analyzer’s network setup (after the
first-time power up) using the normal Windows XP methods (see “Changing
Network Settings" on page 15).
(If LAN connected) Will this
computer connect to the
Internet directly, or through a
network?
N/A Choose "Yes, through a
network"
(Agilent does not
support connecting to
the internet through a
modem directly
connected to the logic
analyzer.)
N/A
(If LAN is not connected)
Windows unable to determine
LAN connectivity.
N/A You are told to set up
LAN later.
N/A
Ready to register with Microsoft Windows XP is already enabled to run on the logic analyzer. This registration is to
allow Microsoft to contact you.
Who will use this computer? For All: Entering names here lets multiple users use the logic analyzer with
administrator permissions. By default their passwords will be blank.
Table 1 Answering Windows Welcome Questions
Standalone (No LAN) Workgroup Domain