Filter
Top Products
26 1680-Series Quick Start/Installation
• Do not operate the instrument in the presence of flammable gasses or
fumes. Operation of any electrical instrument in such an environment
constitutes a definite safety hazard.
• Do not use the instrument in a manner not specified by the manufacturer.
• To optimize your comfort and productivity, it is important that you set up
your work area correctly and use your equipment properly. Refer to
http://www.agilent.com/quality/Working_In_Comfort.pdf
for set-up and
use recommendations
• Position equipment so that it is not difficult to disconnect the power cord.
To clean the instrument
If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the external surfaces of the instrument with a soft cloth dampened
with a mixture of mild detergent and water.
3 Make sure that the instrument is completely dry before reconnecting it to a
power source.
Safety Symbols
Instruction manual symbol: the product is marked with this symbol when it is
necessary for you to refer to the instruction manual in order to protect against
damage to the product.
Hazardous voltage symbol.
Earth terminal symbol: Used to indicate a circuit common connected to
grounded chassis.
!