Filter
Top Products
4 1680-Series Quick Start/Installation
First-Time Power Up Considerations
The first time you turn on the logic analyzer, the Windows
®
Welcome session
starts. Your logic analyzer configuration and the answers to the Windows
Welcome questions are affected by how you choose to use the logic analyzer.
Determine Whether the Instrument will be Connected to the Network
Standalone
You are going to use the logic analyzer as a standalone instrument (no LAN
connection). Printing requires a printer attached to the logic analyzer, sharing
files is done via USB flash drive or floppy disk.
Connected to a Network
If you require the ability to print, share files, remotely control the logic
analyzer, etc. over the network, you need to either join a workgroup or
domain.
Get Network Setup Information
For networking, find out whether the network that your instrument will be
connected to uses the Microsoft Workgroup model or Microsoft Domain model.
In order for your instrument to perform tasks over the network (print,
transfer files, etc.) your instrument must be configured appropriately for the
networking model in use at your site.
NOTE
Use the Enter and arrow keys on the attached keyboard. The logic analyzer front-panel keys
do not work until Windows is running.
NOTE
If you plan to use COM automation to programmatically control a logic analyzer from a
remote computer, be aware that the remote computer and the logic analyzer must both
have the same kind of network membership; that is, they must both be members of a
"Workgroup", or they must both be members of a "Domain". This is due to the security
requirements of Distributed COM.