Filter
Top Products
zt1100/xz200 and xt1500 Series Removing and Replacing Parts 39
Troubleshooting and Self-Repair Guide
Removing and Replacing Parts
This chapter shows how to remove and replace the notebook’s user-replaceable components.
Caution
Always provide proper grounding when performing repairs. Without proper
grounding, an electrostatic discharge can damage the notebook and its
components.
Notes
To reassemble a component, perform the removal procedure in reverse order. Any special notes
required for reassembly are included at the end of each section.
Symbols like this are used throughout this chapter to show approximate full-size screw
outlines. Use these to verify the sizes of screws before you install them. Installing a wrong-size
screw can damage the notebook. (The symbol shown represents an M2.5×5mm T-head screw.)
Notes
Please refer to the “hp parts home” on the web for the latest part numbers.
www.hp.com/hps/parts