Filter
Top Products
2
3Com AirProtect Sensor 5750 Features
Feature Description
1 Antenna
Connectors
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4
GHz and 5.0 GHz bands.
2 LEDs The LEDs indicate power and activity. See “Checking the LED
Indicators” on page 8 for details.
3 Ethernet Port The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com Wireless LAN switch. The connection can be direct to a 3Com
switch or indirect through an intermediate Layer 2 or Layer 3 network.
Use a standard Category 5 cable with straight-through signaling and
standard RJ-45 connectors to connect the sensor to the switch on the
network.
4 Serial Port The serial port is not used for basic sensor operations.
5 Reset Button To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the sensor
and holding for at least 20 seconds.
6 Kensington lock connector
7 Detachable rear-panel cover
8 Mounting Bracket The mounting bracket comes attached to the sensor and allows the
unit to be mounted on a wall or ceiling.
2
6
43
1
5
78
1