ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 199
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
Configures a static MAC
address port filtering rule.
13
inactive
Disables a static MAC address
port filtering rule.
13
mirror-port
Enables port mirroring. 13
<port-num>
Sets a monitor port (the port to
which traffic is copied for
analysis).
13
mirror-
filter
ingress type
<all|dest|src>
Specifies whether all incoming
traffic is copied from the
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
13
mac <mac-addr>
Specifies the destination MAC
address or the source MAC
address of the device which
traffic will be copied.
13
egress type
<all|des|src>
Specifies whether all outgoing
traffic is copied from the
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
13
mac <mac-addr>
Specifies the destination MAC
address or the source MAC
address of the device which
traffic will be copied.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority <1-65535>
Sets the priority of an active
port using LACP.
13
trunk <T1|T2>
Activates a trunk group. 13
<T1|T2> lacp
Enables LACP for a trunk
group.
13
<T1|T2>
interface <port-
list>
Adds a port(s) to the specified
trunk group.
13
interface <port-
list> timeout
<lacp-timeout>
Defines the port number and
LACP timeout period.
13
cluster <vlan-id>
Sets the cluster management
VLAN ID.
13
name <cluster
name>
Configures a name to identify
the cluster manager.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
