ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 195
profile <name>
start-address
<ip> end-
address <ip>
Deletes a rule in the IGMP
filtering profile.
13
igmp-snooping
Disables IGMP snooping. 13
mac-forward mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to
a VLAN group (if any)
forwarded through an
interface(s).
13
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded
through an interface(s).
13
mac-filter mac <mac-addr>
vlan <vlan-id>
inactive
Enables the specified MAC-
filter rule.
13
mac <mac-addr>
vlan <vlan-id>
Disables the specified MAC
filter rule.
13
mirror-port
Disables port mirroring on the
switch.
13
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
13
trunk <T1|T2>
Disables the specified trunk
group.
13
<T1|T2> lacp
Disables LACP in the specified
trunk group.
13
<T1|T2>
interface
<port-list>
Removes ports from the
specified trunk group.
13
storm-control
Disables storm control on the
switch.
13
bandwidth-
control
Disable bandwidth control on
the switch.
13
vlan1q gvrp
Disables GVRP on the switch. 13
port-isolation
Disables port isolation. 13
ingress-check
Disable ingress checking on
the switch.
13
spanning-tree
Disables STP. 13
<port-list>
Disables STP on listed ports. 13
timesync
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
