VX-8R OPERATING MANUAL 23
OPERATION
ANTENNA SELECTION
To select the antenna for the AM Broadcast Reception:
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
1: ANTENNA AM1: ANTENNA AM
1: ANTENNA AM1: ANTENNA AM
1: ANTENNA AM.
3. Press the key briefly to enable the antenna selection.
4. Rotate the DIAL knob to select the AM antenna to be used: “
BAR ANTENNABAR ANTENNA
BAR ANTENNABAR ANTENNA
BAR ANTENNA”
(Uses the internal Bar Antenna) or “
BAR & EXTBAR & EXT
BAR & EXTBAR & EXT
BAR & EXT” (Uses both the internal Bar
Antenna and the Rubber Flex Antenna).
5. When you finish the selection, press the PTT switch to exit from the Menu
mode and return to the Broadcast Reception mode.
To select the antenna for the FM Broadcast Reception:
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
2: ANTENNA FM2: ANTENNA FM
2: ANTENNA FM2: ANTENNA FM
2: ANTENNA FM.
3. Press the key briefly to enable the antenna selection.
4. Rotate the DIAL knob to select the antenna to be used:“
EXT ANTENNAEXT ANTENNA
EXT ANTENNAEXT ANTENNA
EXT ANTENNA”
(Uses the Rubber Flex Antenna) or “
EAR PHONEEAR PHONE
EAR PHONEEAR PHONE
EAR PHONE” (Uses the Earphone An-
tenna).
5. When you finish the selection, press the PTT switch to exit from the Menu
mode and return to the Broadcast Reception mode.
If you wish to output the audio of the FM Broadcast station to the VX-8R internal
speaker while using the earphone antenna, select Set Mode Item
90: SPEAKER90: SPEAKER
90: SPEAKER90: SPEAKER
90: SPEAKER
OUTOUT
OUTOUT
OUT to “
SPEAKERSPEAKER
SPEAKERSPEAKER
SPEAKER”.
AM AND FM BROADCAST RECEPTION
