VX-8R OPERATING MANUAL 153
4. Repeat step 3 as necessary to complete the message (up to 16 characters).
5. If you make a mistake, press the key to back-space the cursor; now re-enter the
correct letter, number, or symbol.
6. When you have entered the desired Opening Message, press the key to save the
new settings.
SET MODE ITEM 66: PAGER ANS-BACK
Function: Enables/Disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
Available Values: ON / OFF
Default: OFF
SET MODE ITEM 67: PAGER CODE-RX
Function: Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
See page 40 for details.
SET MODE ITEM 68: PAGER CODE-TX
Function: Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 40 for details.
SET MODE ITEM 69: PASSWORD
Function: Programming and activating the Password feature.
See page 122 for details.
SET MODE ITEM 70: PR FREQUENCY
Function: Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS
Decoder.
Available Values: 300 Hz ~ 3000 Hz (1000 Hz/step)
Default: 1600 Hz
SET MODE ITEM 71: PRI REVERT
Function: Enables/Disables the Priority Revert feature.
Available Values: ON / OFF
Default: OFF
SET MODE ITEM 72: PRI TIME
Function: Selects the time between the Priority (Dual Watch) channel checks, when the
feature is active.
Available Values: 0.1sec ~ 0.9sec (0.1sec/step) or 1.0sec ~ 10.0sec (0.5sec/step)
Default: 5.0sec
SET MODE
SET MODE SELECTION DETAILS
