94
The scanner starts custom search of the custom search range you selected,
stopping on any transmission it finds and displaying the frequency. Turn the Scroll
Control to change the search direction. An arrow appears, showing the current
search direction.
To turn search ranges on or off, press and . To hold searching, press
. To resume searching, press .
To lock out a frequency found while searching, press . There are two different
results based on the number of times you press .
Press 1 time: appears
Press 2 times: appears and the scanner resumes custom
search.
If you turn off the active custom search range, the scanner skips to the next custom
search range and continues searching.
If all frequencies in all active custom search ranges are locked out,
appears and the scanner does not stop.
You can edit up to 10 custom search ranges. The names of the custom search
ranges appear on the display. The default custom search range names appear as
, , and so on.
to
Another approach is
+
Press to .
At this point you can edit each of the settings that comprise a custom search.
— lets you edit the custom search range’s name.
— lets you view and select the frequency ranges to search. The
scanner prompts you to enter the upper and lower search limits.
[0] [1] - [9]
[HOLD/RESUME] [HOLD/RESUME]
[L/O]
[L/O]
[L/O]
[L/O]
Note:
[MENU]
[SCAN/SEARCH]
Temporary L/O
Locked Out
All
Locked!
Custom 1 Custom 2
Search for ...
Edit Custom
Custom 1, Custom 2 Custom 10.
Quick Search? Yes=”E” / No=”.”
[.No] then Edit Custom
Edit Name
Edit Srch Limit
Editing a Custom Search Range
gQ g
Qg
Qg
Qg
