A SERVICE OF

logo

Open as PDF
next previous
90
This setting controls whether the scanner treats the channel as a priority channel
while scanning. Select or , then press .
— when you turn on the Priority feature, the channel will be scanned every 2
seconds.
— the channel will not be treated with priority. The default setting is .
Select a system
Select a channel group
Select the channel
— the scanner does not alert you when the channel becomes active.
- — the scanner sounds an alert beep to notify you that the channel has
become active. You can choose any of 9 different beep types. Once you choose an
alert tone, then:
— the scanner automatically sets the channel alert beep to match the master
volume level.
- — the scanner adjusts the volume of the beep to the level you select.
Select a system
Select a channel group
Select a channel
— the scanner outputs the signal.
— the scanner does not output any audio.
On Off
On
Off Off
Program System
Edit Group
Edit Channel
Set Alert
Off
Alert 1 9
Set Level
Auto
Level 1 15
Program System
Edit Group
Edit Channel
Set Record
On
Off
Setting Channel Alert MECL
[MENU]
[MENU]
gg
Qg
Qg
Qg
Qg
Qg
Qg
Qg g
gg
Qg
Qg
Qg
Qg
Qg
Qg
Set Record MECL