CS8.0 Bikes Owner’s Guide
57
What These Modes Do
C E: M E M
These modes require the use of the external power option, and
are accessed by changing the default operation mode in Setup
Mode (see Chapter 14). They differ from normal operation in
several ways.
These modes:
• Restrict operation to just manual and custom programs.
• Replace the normal workload control modes to
modes more common in the rehabilitation and testing
environments.
• Provide a unique rpm limiting feature for cases where
excessively rapid motion is of concern.
• Work in constant power mode and, since precise
workload control is of prime importance all the time,
torque is not rolled off at low rpms (see Appendix C).
• Have lower than normal minimum workload, because of
the use of external power.
