Thales Navigation CGRS Manual

A SERVICE OF

next previous

Surveying with ProMark2 79

Surveying with ProMark2

Stop-and-go Rover

There are two rover modes available—Stop-and-go and Kinematic. The mode must be

selected prior to starting the survey. The following steps refer to the setup for stop-and-go

operation.

1. Turn on the ProMark2 receiver by pressing the red on/off button on the face of the

receiver. The opening screen appears, followed by the

Mode screen, Figure 3.41.

2. Select

Survey from the Mode screen.

Figure 3.41 Mode Screen