68 Promark2 User’s Guide
The
Point Attribute screen lets you enter attribute information for the survey point
you are about to observe. The attribute information comprises the following
parameters:
• A 4-character site ID. You must assign a unique site ID to each point surveyed in
your project. If you observe the same point more than once, assign this point the
same site ID for each data collection session.
• An optional 20-character narrative description of this point.
To enter point attribute information, highlight the field to be changed, and press the
ENTER button. Change the values to those desired. Select Save when you are
finished to return to the
Survey Menu.
Refer to the description of the
Point Attribute - Static screen, page 112, for further
details regarding this screen.
6. From the
Survey Menu, select Recording Interval (see also page 120). Set the
recording interval to 1 or 2 seconds, and be sure to match this interval in the Rover
receiver.
Figure 3.32 Point Attribute Screen
