Perform one n/216=inch reverse line feed
Mode
ASCII
Decimal
Hexadecimal
Std.
<ESC> “j” n
27 106 n
1B 6A n
Feeds the paper once by n/216 inches in the reverse direction, where
n is between 1 and 255. Does not move the print position right or left.
Does not change the line-spacing setting.
Feed paper n lines
hnode
ASCII
Decimal Hexadecimal _
<ESC> “f’ “1” n 27 102 49 n 1B 66 31 n
Std.
<ESC> “f <l> n 27 102 1 n 1B 66 01 n
Feeds the paper n lines from the current line, where n is between 0
and 127.
Set top of page at current position
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> “4”
27 52
1B 34
Sets the current position as the top-of-page position. Note that this
can also be done from the control panel.
Set page length to n lines
Mode ASCII
Decimal
Hexadecimal
Both <ESC> “c” n
27 67 n
1B 43 n
Sets the page length to n lines in the current line spacing, where n -
is between 1 and 127 in Standard mode or between 1 and 64 in IBM
-
mode. Changing the line spacing later does not alter the physical
page length. The current line becomes the top of the page.
58
