Instructions for assembly
GB
23
Start of operation
Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.
This indication will go off after 30 seconds or as soon as a key
has been pressed.
Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.
Technical data
Electrical connection
• The electrical connection must be carried out by a quali-
fied electrician who is authorised to carry out such work!
• Statutory regulations and the connection specifications issued
by the local power supply company must be strictly observed.
• When connecting the appliance it must be ensured that there
is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3mm. Line-protecting switches, fuses or contactors are sui-
table cut-out devices.
• When connecting and repairing the appliance disconnect it
from the electricity supply with one of these devices.
• Ensure that all live connections are safely insulated when
installing the oven.
• The earth wire must be so long that if the strain relief fails, the
live wires of the connecting cable are subjected to tension
before the earth wire.
• Any superfluous cable must be removed from the installation
area beneath the appliance.
• The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
• Connection to the mains is carried out in accordance with the
circuit diagram, unless the connection cable is already fitted
with a plug.
• If damaged, the manufacturer or his customer service must
replace the connection cable installed with a special connec-
tion cable.
Attention!
Incorrect connection may result in the power electronics unit
being destroyed.
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
52 x 580; 600; 700 x 510
560 x 490
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Front right Ø cm / kW
Back rights Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1
10
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
400-415V 2N~, 50-60 Hz
230 -240V
5.9
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
52 x 770; 800 x 510
560 x 490
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Front right Ø cm / kW
Back rights Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1
10
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
400-415V 2N~, 50-60 Hz
230 -240V
5.9
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
52 x 580; 600; 700 x 510
560 x 490
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Right Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
16/max. 2.0
21/max. 3.1
29/max. 2.8
10
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
400-415V 2N~, 50-60 Hz
230 -240V
5.9
green/yellow
green/yellow
blue
white
brown
black
green/yellow
green/yellow
blue
white
brown
black
green/yellow
green/yellow
blue
white
brown
black
green/yellow
green/yellow
blue
white
brown
black
