EENNGGLLIISSHH
22
RECORDING
Start recording on component connected to
the TAPE MONITOR.
2
Select the desired input as a recording
source except for TAPE MONITOR.
1
RReeccoorrddiinngg wwiitthh TTAAPPEE MMOONNIITTOORR
Select VIDEO 2, VIDEO 3 or VIDEO 4 as
a recording source.
1
DDuubbbbiinngg ffrroomm vviiddeeoo ccoommppoonneennttss oonnttoo
VVIIDDEEOO 11
Start play on the desired input.
3
Be sure that “TAPE M” goes off. For tape monitor function, refer to “TAPE MONITOR
function” on page 11.
Start recording on the VIDEO 1.
2
Start play on the VIDEO 2, VIDEO 3 or
VIDEO 4.
3
The audio and video signals from the VIDEO 2,
VIDEO 3 or VIDEO 4 will be dubbed onto the
VIDEO 1 and you can enjoy them on the TV set and
from the speakers.
The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
The volume and tone (bass, treble) settings, etc. have no effect on the recording signals.
