A SERVICE OF

logo

-9-
Mechanical Disassemblies
1 Remove 1 screw A (M4x8) to release grounding wires.
2 Pull the Rear Panel ass’y upward.
3 Remove 4 screws B (T3x6) and remove the AV Board.
4 Remove 4 screws C (T3x6) and remove the DVI Board.
5 Remove 4 screws D (T2.6x6) and remove the speaker.
6 Remove 1 screws E (T3x8) and remove the Sensor Board.
Fig.3
Fig.4
1 Remove 3 screws A (M3x4), 1 screw B (M3x8) and unhook 2 hooks C at
the both of left and right side, and the take the Front Panel ass’y off.
2 Remove 1 screw D (T3x8) to take the R/C Board off.
c AV , DVI, Temp Board and Speaker removal
v Front Panel and R/C Board removal
A
B
B
B
C
A
A
A
B
C
D
DVI board
AV board
Speaker
R/C board
B
C
C
D
D
E
Temp board