A SERVICE OF

logo

Open as PDF
next previous
-17-
Optical Parts Disassemblies
1 Remove 9 screws (M3x10) to take the Optical Unit Top off upward.
Fig.8
, Optical Unit Top removal
Optical Unit Top
1 Remove 4 screws A (M2.5x4) and take the LCD/Prism ass’y off upward
from the optical unit.
2 Remove each screw B and take the glass off upward.
LCD Panel/
Prism Ass’y
Note:
Do not replace the LCD panel
separately otherwise it can
not obtain proper picture.
Fig.7-1
m Polarized Glass-Out/Pre-Polarized Glass removal
A
A
A
LCD Panel/Prism
Ass’y
Fig.7-2
* Glasses should be placed as the
film attached side comes to the
LCD panel side.
LCD Panel
B
Polarized Glass-Out
Optical filter