58
The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Information Menu
The horizontal frequency of the input signal is displayed in
KHz, or - - - - - when no signal.
The vertical frequency of the input signal is displayed in Hz,
or - - - - - when no signal. Numbers of Hz doubles when
during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote control to display the
Information Menu.
INFO. button
Remote Control
Press the Point
buttons to select the Information. The
Information Menu is displayed.
See below for displayed information.
Off, Ready, Shut down or Timer is displayed.
The selected screen size is displayed.
The selected input source is displayed.
The selected lamp mode is displayed.
Information
The selected language is displayed.
The selected Key lock icon is displayed.
Off or On 1 or On 2 is displayed.
The selected remote code is displayed.
Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp status
Lamp counter
Power management
Key lock
PIN code lock
Remote control
Direct Operation
Menu Operation
Input Source Information Display
