Saving Energy With The Power Saving Timer
71
4
Saving Energy With The Power Saving
Timer
You can set sleep time to let the ma-
chine go to saving energy condition
and set the wake up time when it re-
turns to standby mode the next morn-
ing. During this Power Saver mode, a
fax message received is stored in the
memory and will be printed automat-
ically the next morning after the wake
up timer is activated.
As a typical example, you could pro-
gram the heating element inside the
printer to stay off at night and over
the weekend. (You can program dif-
ferent settings for every day of the
week.)
To use the Power Saving timer, you
must:
• Program the timers for each day of
the week.
• Switch the Power Saving timer fea-
ture on.
Setting the Power Saving time
( Function 71 )
Note
❒ While the Power Saving timer is
active, all incoming calls are re-
fused if the memory fills up.
-
--
-
Example:
For Tuesday, set the Power Saving
timer to switch the heater on at 9 am
and off at 6 pm.
A Press the {
{{
{Function}
}}
} {
{{
{6}
}}
} then enter
access code {
{{
{2}
}}
} {
{{
{2}
}}
} {
{{
{2}
}}
} {
{{
{2}
}}
}. Then
press {
{{
{7}
}}
} {
{{
{1}
}}
} and the {
{{
{Yes}
}}
} key.
SET TIMER Y/N/hi
SUN
B Use W
WW
W and V
VV
V to scroll through the
days of the week.
SET TIMER Y/N/hi
TUE
Note
❒ Example: Press V twice to go to
Tuesday.
C Press the {
{{
{Yes}
}}
} key
TIMER#1 TUE */#/Y
ON FROM 12:00AM
D To change the ON to OFF, or the
other way round, press the {
{{
{*}
}}
} or
{
{{
{#}
}}
} keys.
Note
❒ There are two timers for each
day, each with an ON/OFF set-
ting. “ON” means that the heat-
er will switch on at the time
indicated. “OFF” means that the
heater will switch off at the time
indicated.
E Press V
VV
V to move the cursor under
the time.
TIMER#1 TUE */#/Y
ON FROM 12:00AM
