replacing printer consumables
Operator’s Guide24
note
The
following applies to all replacement
procedures: Be careful not to stain your
hands, clothes, or the interior of the printer
with toner. If toner is spilled, use a toner
vacuum to clean up the loose toner
. Do not
use water to clean the toner from the
printer
. Any toner remaining on clothes can
be removed with a cloth dampened in cold
water; never use hot water to remove toner
from clothes or skin.
Adding Toner
caution
Do
not add toner until the printer
displays a toner low message.
Replace the fuser cleaner felt and waste
toner bottle every 8,000 pages of
printing or each time a new toner bottle
is opened, except when replacing starter
toner. The toner kit contains two toner
bottles, two fuser cleaner felts, and two
waste toner containers.
A single bottle of toner is rated for
approximately 8,000 pages, based on a
5% page coverage. Most applications
will yield an amount close to this rating.
However, your yield may vary according
to your print application.
Toner is light and easily becomes
airborne and can contaminate the
printer.
