Timer Recording 31
Follow the steps below to program the TV/VCR/DVD to
record TV programs while you’re away from home.
The TV/VCR/DVD will record and turn itself off automatically.
You can set a maximum of 8 timer recordings.
Before you begin, make sure ...
● The clock is set. If the clock is not set, the Manual Clock
Set menu will appear. See pages 21-22 to set the clock.
● Channels are set. Details are on page 19.
● A tape is in the TV/VCR/DVD. Make sure the record tab is
intact. Details are on page 8.
1
Press SET-UP.
2
Press ▲ or ▼ to select TIMER
PROGRAMMING, then press ENTER.
3
Press ▲ or ▼ to select a program position.
Then, press B.
4
With first cell flushing, press ▲ or ▼ to select “D”
(for Digital) or “-” (for Analog).Then press B.
When you select “D” (Digital) or “-” (for Analog),
the channel you were watching last will be
entered in the CH field automatically.
•You cannot access the Timer
Programming menu at step 2 if
the clock is not set. The
Setting Clock menu will
appear. Follow the steps on
pages 21-24 to set the clock.
• Enter the information while
the space is flashing.
Helpful Hints
2-4
1
