TV/VCR
Timer Recording 29
Follow the steps below to program the TV/VCR/DVD to
record TV programs while you’re away from home.
The TV/VCR/DVD will record and turn itself off automatically.
You can set a maximum of 8 Timer Recordings.
Before you begin, make sure...
● The clock is set. If the clock is not set, the Manual Clock
Set Menu will appear. See pages 21-22 to set the clock.
● Channels are set. Details are on page 19.
● A tape is in the TV/VCR/DVD. Make sure the record tab is
intact. Details are on page 8.
1
Press SET-UP. Press ▲ or ▼ to select TIMER
PROGRAMMING, then press ENTER.
2
Press ▲ or ▼ to select a program position.
Then, press B.
3
While CH is selected, press ▲ or ▼ to select
the channel you want to record. Then press B.
If the TV/VCR/DVD is connected to a Cable
Box/Satellite Receiver, the TV/VCR/DVD must be on
channel 3, 4 or AUX.
Set CH as 03, 04 or AUX in the Timer Programming
Menu. Choose the channel you want to record at the
Cable Box/Satellite Receiver. Leave the Cable
Box/Satellite Receiver on for the Timer Recording.
Leave the TV/VCR/DVD set to AUX. (Press SELECT
on the remote to choose AUX at the TV/VCR/DVD.)
Additional details are on page 9.
Instructions continue on the next page.
•You cannot access the Timer
Programming Menu at step 1 if
the clock is not set. The
Setting Clock Menu will
appear. Follow the steps on
pages 21-24 to set the clock.
• Enter the information while
the space is flashing.
Helpful Hints
1-3
1
