TV/VCR
3
Press REC/OTR I on the
front of the TV/VCR/DVD.
28 One-Touch Recording
A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to 8 hours long.
Before you begin...
● Turn on the TV/VCR/DVD.
● Press SELECT to put the unit in TV/VCR mode.
The red VCR/TV light will appear on the front of the unit.
● Insert a videotape with its erase prevention tab in place.
Details are on page 8.
1
Press the Number buttons or CH. ▲/▼to select
the channel you want to record.
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3, 4 or AUX.
Select the channel you want to record at the Cable
Box/Satellite Receiver. Details are on page 9.
2
Press REC MODE to select a tape recording
speed (SP or SLP). Details are on page 27.
3
Press REC/OTR I on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start immediately.
Each press of REC/OTR I will increase the recording
time by 30 minutes. The maximum recording length is
8 hours.
4
Press STOP C to stop a One-Touch Recording
before its designated end time. Otherwise,
recording will stop at the time you designated. The
TV/VCR/DVD will turn off when the OTR ends.
•You cannot start an OTR with
the REC I button on the
remote control.
•To show the remaining
recording time, press DISPLAY.
OTR and the remaining
recording time will appear
briefly in the top left corner of
the screen.
• If the tape ends before the
recording’s end time, the
TV/VCR/DVD will stop
recording, eject the tape, and
turn itself off.
•An OTR will continue even if
you turn off the TV/VCR/DVD.
The flashing REC/OTR light
indicates the recording is still
in progress.
•To change the recording
length while an OTR is in
progress, press REC/OTR I
repeatedly.
•You cannot pause an OTR.
• If the preset time for a Timer
Recording comes up during an
OTR, the OTR has priority.
The Timer Recording will not
take place.
Helpful Hints
4
2
1
