Pelco Manual C350M-H (10/99) 7
SPECIFICATIONS
GENERAL
Construction: Aluminum with injection-molded plastic housing
Finish: Gray polyester powder coat
Environment: Indoor; 35° to 140°F (2° to 60°C)
Weight: 4 lb (1.80 kg)
MECHANICAL
Pan: 0-320° movement in horizontal plane
Speed: 6°/sec ±.5° maximum load 15 lb (6.8 kg)
Operation: Upright or inverted
Bearings: Heavy-duty needle bearings on output shaft
Overload
Protection: Slip clutch on motor
ELECTRICAL
Input Voltage
PS7: 120 VAC
PS7-24: 24 VAC
Power Requirements
PS7: 60 mA (6.9 vA)
PS7-24: 160 mA (3.8 vA)
Connectors
PS7: 6-ft (1.82 m) AC power cord
PS7-24: 8-ft (2.43 m) cable with spade lugs
Motors: Two-phase induction type, continuous duty, instantaneous reversing
Limit Switches: Pan – 5 amp; external adjustment
Conductors: 5, unshielded (functions: left, right, auto, motor common, safety ground)
Braking: Dynamic for instantaneous stopping
RATINGS
NEMA 1
(Design and product specifications subject to change without notice.)
