P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)
ii
FOREWORD
This manual provides information on the installation, maintenance and service of the Paxton
supercharger kit designed for small block Ford carbureted engines. Contact Paxton Automo-
tive Corporation for any additional information regarding this kit and any of these modifica-
tions at (805) 604-1336 7:00am-3:30pm PST.
An understanding of the information contained herein will help novices, as well as experi-
enced technicians, to correctly install and receive the greatest possible benefit from their
Paxton supercharger. When reference is made in this manual to a brand name, number, spe-
cific tool or technique, an equivalent product may be used in place of the item mentioned. All
information, illustrations and specifications contained herein are based on the latest product
information available at the time of this publication. All rights reserved to make changes at
any time without notice.
© 2004 PAXTON AUTOMOTIVE
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or
translated into another language in any form, by any means without written permission
of Paxton Automotive.
NOTES
• The crank pulley supplied with this kit is designed to
accomodate the stock 1965 Mustang water pump*,
alternator and power steering. Vehicles with different
accessories may need custom spacing or elimination
of some accessories.
o be replaced).
• Distributor clearance to the carburetor enclosure
is minimal. Distributors must have a small diam-
eter cap in order to fit. Additionally, tall distributors
such as an MSD PN 8354 installed on a 351W
contact the front of the carburetor enclosure and
should be replaced with an MSD PN 8578 (or
equivalent).
*** NOTE ***
This supercharger kit is not compatible with air conditioning as the A/C pulley is not
present on the supplied crank pulley.
