[Upside-down]
Select “On” or “Off” to determine whether or not to turn the image upside-down.
• Default: Off
[Indicator]
Determine whether or not to use the following indicators. Select “On” to use the following indicators to check
the operational status by lighting them. Select “Off” to turn off the indicators at all times.
– Link indicator
– Access indicator
– Power indicator
– SD memory card error indicator
– SD memory card error indicator/Auto focus indicator
– SD memory card error indicator/Focus assist indicator
– SD memory card error indicator/ABF indicator
• Default: On
Note
• Link indicator (orange): This indicator will light when communication with the connected device is
available.
• Access indicator (green): This indicator will light when accessing a network.
• Power indicator (green)
: This indicator will light when the power
is on.
• SD memory card error indicator (red)
: Lights when an error occurred in
the SD memory card.
• SD memory card error indicator/Auto focus indicator (red)
: Lights when an error occurred in the SD memory card. This LED will blink in the process of
the auto focus function and blinking will stop when the focus adjustment is complete.
• SD memory card error indicator/Focus assist indicator
: This indicator will blink to indicate any of the following.
– When data cannot be saved on the SD memory card
– When the focus assist function is activated
– When “BEST FOCUS” is displayed on the screen
• SD memory card error indicator/ABF indicator
: Lights when an error occurred in the
SD memory card. This LED will blink in the process of the auto back focus function and blinking will
stop when the focus adjustment is complete.
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button
*1
or the SD
saving status indicator
*2
will be displayed to notify of the camera status
*1
.
• Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
• Real time: Provide notification of the camera status when the status has changed.
• Default: Real time
Note
• Depending on the network environment, notification may not be provided in real time.
[Alarm status reception port]
When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status change
notification is to be sent.
• Available port number: 1 - 65535
• Default: 31004
Operating Instructions 51
10 Configure the basic settings of the camera [Basic]
