• Available number of characters: 1 - 32 characters
• Unavailable characters: " & * / : ; < > ? \ |
• Default: None (blank)
[Post alarm]
• Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
• Default: 1fps
• Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
• Default: 100pics
• Recording duration
Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.
[Image capture size]
Select the capture size of images to be transmitted to the FTP server or of an image to be attached to the
alarm E-mail.
Aspect ratio
Aspect ratio 4:3 QVGA/VGA/800x600
*1
/1280x960
*2
Aspect ratio 16:9 320x180/640x360/1280x720
*2
Picture (Camera) mode
1.3 mega pixel (VGA) [4:3] QVGA/VGA/1280x960
1.3 mega pixel (800x600) [4:3] QVGA/800x600/1280x960
1.3 mega pixel [16:9] 320x180/640x360/1280x720
3 mega pixel [4:3] VGA/1280x960
3 mega pixel [16:9] 320x180/640x360
• Default: VGA
[Image compression rate upon alarm detection]
Select “On” or “Off” to determine whether or not to change the image quality of “Quality1” (®page 77) upon
alarm detection.
• On: Images will be transmitted with the image quality selected for “Image quality upon alarm detection”.
• Off: Does not change the image quality upon alarm detection.
• Default: Off
[Image quality upon alarm detection]
Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
138 Operating Instructions
13 Configure the alarm settings [Alarm]
