66
• Year
Press the numeric button to enter the correct year.
• TIME
Press the numeric button to enter the correct time.
• MINUTE
Press the numeric button to enter the correct minute.
• AM/PM
Press the NEXT or PREV button to select the correct time.
After the configuration, press the SETUP button while hold-
ing down the SHIFT button. The configuration will be updat-
ed when closing SETUP MENU.
Notes:
• Adjust the time and date when the clock display is differ-
ent from the current one.
• The clock display pattern is changeable with the setting in
WJ-SX150A Administrator Console. (Refer to p. 93.) The
factory default setting is Month/Day/Year.
• The clock is automatically adjusted to 0 second of the set-
ting time and date when closing SETUP MENU.
• Hour system (12- hours or 24- hours) is changeable
through WJ-SX150A Administrator Console.
■ D. S. T. (Daylight Saving Time)
● How to Display
To display this menu on the monitor, move the cursor to 200
D. S. T. in SETUP MENU by moving the joystick to ▼ or ▲.
● Parameters
Select ON or OFF by pressing the NEXT or PREV buttons.
ON: Daylight saving time is activated.
OFF: Daylight saving time is deactivated.
The factory default setting is ON.
After the configuration, press the SETUP button while hold-
ing down the SHIFT button. The configuration will be updat-
ed when closing SETUP MENU.
Notes:
• The start/end date are configurable through WJ-
SX150A Administrator Console. (Refer to p. 87.)
• When ON is selected for D. S. T., ∗ is added beside the
time display.
Example: ∗10: 55 AM
■ SEQUENCE SETUP
● How to Display
To display this menu on the monitor, move the cursor to 300
SEQUENCE in SETUP MENU by moving the joystick to ▼ or
▲.
Then, press the CAM (SET) button. The submenu appears
on the monitor.
200 D.S.T. ON
