Programming function settings
Yo
u can change the function settings to suit your needs.
How to change the function settings
1 Pr
ess MMENUN, then select the “ALL SETTINGS” by pressing arrow keys (MDN, MCN, MFN, or MEN).
2 Press M
N (Monitor button) (“O
K”), then select the desired item by pressing MDN or MCN.
3 Press M
N (Monitor button) (“O
K”).
4 Press MDN or MCN to select the desired function, then press M
N (Monitor button) (“O
K”).
R This step may not be necessary depending on the feature being programmed.
5 Press MDN or MCN to select the desired setting, then press M
N (Monitor button) (“O
K”).
6 To finish the operation, press MMENUN 2 times.
Note:
R When no operation is performed for about 60 seconds during settings, the setting function quits.
Function list
In
the following list, < > indicates the default settings.
Item Function Setting
START-UP
S
E
TTINGS
PREVENT
MOTTLED COLOR
*1
<POWER FREQUENCY (50Hz)>
/ POWER FREQUENCY
(60Hz)
R To prevent mottled or uneven color from being
displayed, set the power frequency to match the area in
which you use the unit.
TIME AND DATE
SE
TTINGS
*1
You can set the current date and time (page 15).
SELECT
LA
NGUAGE
<
ENGLISH
>
/
FRANÇAIS
/
ESPAÑOL
/
DISPLAY/SOUND
SE
TTINGS
WIDE/ZOOM
SETTINGS
*1
<WIDE MODE>
/ ZOOM MODE
R Select how images are initially displayed: Wide or Zoom.
CONTRAST
When it is difficult to see the monitor display, you can
a
d
just the display contrast. 5 levels are available.
OPERATION
AS
SISTANCE
<Y
ES>
/ NO
R Select NO if you do not want the operation assistance
(page 12, 18) to be displayed when viewing Wireless
Camera images or recorded images.
CONFIRMATION
S
O
UND
<O
N>
/ OFF
R When OFF is selected, all sounds (apart from audio
from talking) are turned off.
BATTERY SAVE
M
O
DE
*1
–
<O
FF>
/ ON
R Select ON to lengthen the time that the batteries can be
used for. However, by selecting ON, the time it takes to
display images when monitoring may increase.
19
How to use
