This unit measures terrestrial magnetism and in-
dicates the direction of the vehicle’s heading.
With the ignition switch placed in the ON posi-
tion, press the
button as described in the
chart below to activate various features of the
automatic anti-glare rearview mirror.
Push andhold
the
button forabout:
Feature:
(Push buttonagain for about 1sec-
ond tochange settings)
1 second Compass displaytoggles on/off
5 seconds
Compass zonecan be changed to
correct falsecompass readings
9 seconds Compassenters calibration mode
For information about the automatic anti-glare
feature, refer to “Automatic anti-glare rearview
mirror” in the “Pre-driving checks and adjust-
ments” section.
Press the
button forabout 1 secondwhen
the ignitionswitch isplaced inthe ON positionto
toggle the compass display
᭺
1
on or off. The
display will indicate the direction of the vehicle’s
heading.
N: North
E: East
S: South
W: West
If thedisplay reads“C”,calibrate thecompass by
driving the vehicle in three complete circles at
less than 5 MPH (8 km/h).
You can also calibrate the compass by driving
your vehicle on your everyday route. The com-
pass will be calibrated once it has tracked three
complete circles.
COMPASS DISPLAY
Press the button when the ignition switch
is placedin the ONposition. The directionwill be
displayed.
LIC1487
COMPASS DISPLAY (if so equipped)
2-6 Instruments and controls
