Chapter A Default Settings — VXI/VME-MXI-2
PCI-Based MXI-2 Interface for Windows A-4 ni.com
VXI/VME-MXI-2
This section summarizes the hardware and software default settings for the
VXI-MXI-2, VXI-MXI-2/B, and VME-MXI-2.
Hardware Settings
A24/A32 write posting Disabled
VXImove uses Synchronous
MXI
Enabled
MXI transfer limit Unlimited
MXI CLK10 signal Receive
Table A-7. PCI Tab Default Settings
Editor Field Default Setting
Low-level register access API
support
Enabled
User window size 64 KB
Expansion ROM Enabled
Table A-8. VXI-MXI-2 Hardware Default Settings
Hardware Component Default Setting
Logical address (U43) 1
VXIbus Slot 0/Non-Slot 0 (W2) Automatic detection
VXIbus local bus (S8, S9) Both OFF: single VXI-MXI-2
VXIbus CLK10 routing (W3) From onboard oscillator
Table A-6. MXI-2 Bus Tab Default Settings (Continued)
Editor Field Default Setting
