WR-120 Owner’s Manual
page 8
www.midlandradio.com
User Notications:
Alert Type (Display, Voice or Tone):
1. Press
MENU
to open menu options.
2. Press ▲ to scroll through menu to ALERT TYPE, then press
SELECT
.
3. Press ▲ to choose VOICE, TONE or DISPLAY then press
SELECT
.
4. Press
MENU
to exit menu mode.
Alert Type Description
Display
When the DISPLAY alert type is chosen, only a
text alert will scroll on the display. There will be
no audible alarm.
Voice
When the VOICE alert type is chosen, the alert
tone will sound for 8 seconds, then you will
hear the voice of the weather broadcast for 3
minutes.
Tone
When the TONE alert type is chosen, the alert
tone will sound for 3 minutes, or until you press
any but ton.
Reviewing Recent Alerts:
The WR-120 All Hazards Weather Alert Radio can store up to 10 different
Weather/Hazard alerts (with overlapping effective times) in its memory. If
the weather radio receives a new alert while any previous alert is still in
effect, it automatically displays the new alert. You can review all alerts still
in effect by pressing ▲ to scroll through the weather radio’s active alert
memory. A double beep indicates the end of the list. “NO MESSAGE” will be
displayed if no alerts are active.
Alert Test:
1. Press
MENU
to open menu options.
2. Press ▲ to scroll through menu to ALERT TEST.
3. Press
SELECT
to sound the alert siren.
4. Press any button to silence the siren or press
MENU
to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position
Set Channel/Volume:
1. Press
MENU
to open menu options.
2. Press ▲ to scroll through menu to SET CHANNEL then press
SELECT
.
3. Tune the channel to the desired broadcast by using ▲ or
▼
.
4. Adjust the volume to a comfortable level by using
VOLUME UP
or
VOLUME DOWN
.
5. Press
MENU
to exit menu mode.
Note: Ensure ON/OFF switch is in the ON position
