23
Preparation Connections Playback Settings Appendix
ENGLISH
Tips
Error messages
When multiple amplifiers are connected by F.C.B.S., the error messages described in the
table below may be displayed on the display. In such a case, ID number setting or remote
cable connection may be in failure. Check the ID number or remote cable connection, referring
to the table below. For details on ID number setting, see “Setting ID number for F.C.B.S”
(vpage18).
Indication Meaning
1 ERROR 02 Multiple amplifiers take ID No. 2.
2 ERROR 03 Multiple amplifiers take ID No. 3.
3 ERROR 04 Multiple amplifiers take ID No. 4.
!
Assign dierent ID numbers to the amplifiers.
4 ERROR 11 The amplifiers with ID Nos. 2-4 cannot communicate with the
amplifier with ID No. 1.
!
If the amplifier with ID No. 1 is not on, turn it ON.
!
Check that the remote cable is properly connected.
5 ERROR 12 The amplifier with ID No. 1 cannot communicate with the amplifiers
with ID Nos. 2-4.
!
If multiple amplifiers take ID No. 1, set ID numbers properly.
!
If the amplifier with ID No. 1 is connected to the amplifier with ID No. 0, set ID numbers
properly.
!
Check that the remote cable is properly connected.
Troubleshooting
1.PM14S1U_ENG_0722.indd 23 2013/07/25 17:08:36
