E-EQ-MX3OGWW-F-ARC MX3 User’s Guide
Appendix B Regulatory Notices and Safety Information
FCC Information:
This device complies with FCC Rules, part 15. Operation is subject to the following conditions:
1. This device may not cause harmful interference
and
2. This device must accept any interference that may be received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning: Changes or modifications to this device not expressly approved by LXE, Inc., could void the user’s authority to
operate this equipment.
EMC Directive Requirements:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. Le present
appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques de le Classe
A préscrites dans le Reglement sur le brouillage radioélectrique édits par le ministere des Communications du Canada.
RF Safety Notice
Caution
This device is intended to transmit RF energy. In accordance with FCC and Industry Canada radio-
frequency safety regulations, when operating this device with the Hip-Flip accessory, it should be used in
accordance with the user's instructions. Additionally, the user should take care to ensure that a minimum
separation distance of 15cm (6 in.) is maintained from the antenna to nearby persons. Use of this device in a
manner not consistent with these instructions can increase the risk of RF exposure. This device is not to be
co-located with other transmitters.
Notice:
The long term characteristics or the possible physiological effects of radio frequency electromagnetic fields have not been
investigated by UL.
Li-Ion Battery
When disposing of the MX3 Main Battery, the following precautions should be observed: The battery should be disposed of
promptly. The battery should not be disassembled or crushed. The battery should not be heated above 212°F (100°C) or
incinerated.
Important: This symbol is placed on the product to remind users to dispose of Waste Electrical and Electronic
Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this product can be recycled,
reclaimed and re-used when properly discarded. Do not discard labeled units with trash. For information about
proper disposal, contact LXE through your local sales representative, or visit www lxe com.
