38 Keypads
MX3 User’s Guide E-EQ-MX3OGWW-F-ARC
Key Map 101-Key Equivalencies for Batch Units
Note: The batch unit key mapping is used on hand held computers that are NOT running an
LXE Terminal Emulator.
When using a sequence of keys that includes the 2
nd
key, press the 2
nd
key first then the rest of the
key sequence. Set the On/Off condition of NumLock before pressing a key sequence. There is no
visual indication of the condition of NumLock.
Note: When the computer boots, the default condition of NumLock is On. NumLock can be set
using BIOS Setup.
Note: When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps
(or CapsLock) condition can be set using BIOS Setup or toggled with a 2
nd
-F1 key
sequence. The CAPS LED is illuminated when CapsLock is On.
To get this
Press These Keys and Then
Press this
key
2
nd
Shift Ctrl Alt CapsLock
key
Contrast x F6
Volume x F8
Backlight x F10
2
nd
2
nd
Shift Shft
Alt Alt
Ctrl Ctrl
Scan
2
Scan
Esc Esc
Space Spc
Enter Enter
Enter (numeric) x x Enter
CapsLock (Toggle) x F1
Back Space BkSp
Tab Tab
BackTab x Tab
Break x F2
Pause x x F3
Up Arrow Up Arrow
Down Arrow Down Arrow
Right Arrow Right Arrow
Left Arrow Left Arrow
Insert x BkSp
Delete x DOT
2
Left Scan key default value is Numeric Enter.
Right Scan key default value is Scan.
